Shop

HandyCon Logo T-shirt – Grey

*Mugs are available for pickup at the reception during the convention.

  • 90% cotton T-shirt
  • 10% Polyester

Choose your model and size before adding to the basket:

£15.00

HandyCon Logo T-Shirt

Only available for collection at the con.

Straight-Cut:

90% cotton T-shirt
10% Polyester

A straight-cut shirt has wide shoulders and a body which is almost square. The side seams, descending from the armpit to the hem, are absolutely straight and perpendicular to the hem. The sleeves are usually cut loose and are quite long when measured from the shoulder seam to the cuff.

Garment sizes are approximate and for guidance only.

Size Guide S M L XL XXL 3XL 4XL 5XL
Chest to fit (inches) 34-36 38-40 42-44 46-48 50-52 54-56 58-60 62-64
Actual chest (cm) 45.5 51 56 61 66 71 76 81
Body length (cm) 71 73.5 76 78.5 81 84 86 89
Sleeve centre back length (cm) 39.5 43 47 51 54.5 58 61.5 64.5
Size Tolerance +/- 2cm

 

Fitted-Cut:

90% cotton T-shirt
10% Polyester

A fitted-cut t-shirt has a curved side seam which comes in at the waist and goes out at the upper and lower ends, to make room for curvy hips and bust/chest areas. The shoulders are also cut narrower, and the sleeves are shorter and more fitted relative to a straight-cut shirt. The neckline may be slightly scooped in front.

Garment sizes are approximate and for guidance only.

Size Guide S M L XL XXL
Ladies size 6/8 10/12 14/16 18/20 22/24
Actual chest (cm) 44 49 54 59 64
Body length (cm) 65 66 68.5 71 72.5
Sleeve length (cm) 33.5 35.5 37.5 40 42.5
Size Tolerance +/- 1cm

 

Washing Instructions:

  • Wash at 30°
  • Wash inside out
  • Do not bleach
  • Wash with similar colours
  • Wash with similar textured garments
  • To avoid excess friction, do not overload the washing machine
  • Do not leave in a wet environment
  • Do not tumble dry
  • Lay flat to dry to avoid shrinking
  • Do not dry clean. Chemicals used in dry cleaning can damage the print on your garment
  • Never iron over the imprint
  • Iron on the reverse side using the lowest heat setting